Home
Company Profile
Corporate advantage
Enterprise service
Team
Project References

Enterprise service
Coal Gangue Comprehensive Utilization R&D and Test Base

Beijing Zhonghonglian Engineering Technology Co., Ltd. commits itself to providing full-process, full-life-cycle green, smart and innovative system solutions. Relying on mature and advanced process technologies and equipment advantages covering the whole metallurgical process, the company focuses on the efficient disposal and comprehensive utilization of coal gangue, the largest industrial solid waste in China, supporting the national strategic goals of carbon peaking and carbon emission reduction.


The company actively explores innovative technical routes. It adopts ferrous metallurgy smelting processes to treat coal gangue and produce high-strength ceramsite and gravel. Together with China Energy Investment Corporation, the enterprise built an R&D and test base for coal gangue comprehensive utilization, dedicated to engineering research, achievement popularization and demonstration application for the treatment and recycling of coal gangue, fly ash and other solid wastes.


The test base is located within the site of Shendong Buerte Coal Mine, Wulanmulun Town, Yijinhuoluo Banner, Ordos City, Inner Mongolia Autonomous Region. Construction started in November 2022, and the base was completed and put into experimental research in October 2023.


The base consists of two major platforms: a multi-functional green smelting simulation production line and a pilot production line. The multi-functional green smelting simulation line carries out roasting experiments at hundred-kilogram scale to study raw material physical properties, roasting technologies, temperature curves, process parameters and product performances. The pilot production line has an annual coal gangue processing capacity of 50,000 tons and realizes engineering transformation of processes verified on the simulation line.


Apart from R&D and tests for comprehensive utilization of coal gangue and fly ash, the base can also conduct engineering development and experimental research on solid wastes such as sludge and red mud, as well as metallurgical pelletizing and sintering technologies.

Multi-functional Smelting Simulation Production Line



Coal Gangue Comprehensive Utilization Products



Subject to different product requirements, coal gangue enters corresponding technological processes after crushing and screening. Coal gangue with particle size larger than 70mm is fed directly into the annular roaster for pyrolysis and decarbonization to produce gravel. Gangue smaller than 70mm is crushed and ground below 200 mesh by vertical pulverizers, then transported to the mixing system for blending, homogenization and humidification before pelletizing on disc pelletizers.  

Disc pelletizers shape coal gangue powder into spherical pellets of 8~16 mm, which are delivered to the annular roaster for pyrolysis, decarbonization and consolidation. Different products are obtained by adjusting consolidation temperature of the annular roaster. Water-retaining ceramsite is produced at approximately 900℃. When the consolidation temperature rises to 1150℃, decarbonized pellets are sintered at high temperature to manufacture high-strength ceramsite with superior cylinder compressive strength.


Ceramsite treated by high-temperature decarbonization and consolidation is cooled in the cooling section of the decarbonizer, where waste heat is recovered. Equipped with a hot air circulation system, the annular decarbonizer cuts process energy consumption, and recovered waste heat can be used for steam generation and power generation.


Huaibei Coal Gangue Comprehensive Utilization Project

General Layout of 5 Million Tons/Year Coal Gangue Comprehensive Treatment Project